Problem: When I insert an image i get a border around it. on screen it does not show up but plots on my sheets. How do I get rid of this border?
Solution: Type: ‘imageframe’ -Select ‘0’. This changes the border visibility to off. The only issue here is you cannot scale it after setting this variable. Just re-type ‘imageframe’ and select ‘1’ to get back to edit mode.
AutoCAD Solutions 
March 10, 2008 at 3:43 am |
Where do I type ‘imageframe’-Select ‘0’?
Thank you in advance
August 7, 2008 at 9:03 pm |
Missouri Medical Malpractice Law…
hey great site….
November 11, 2008 at 4:18 pm |
Diane… Type it in the command box at the bottom of the working window.
February 12, 2009 at 6:53 pm |
Thanks for the tip, helped me a lot
August 31, 2009 at 1:35 pm |
Spot on! Changing this variable removed the faint border around the images on our cover!
October 12, 2009 at 10:05 am |
thanks! great help
November 6, 2009 at 6:51 am |
Thanks man this was a big help
June 30, 2011 at 9:36 am |
opening problem cad flie not open “internal error” plese hellp me
July 16, 2011 at 11:42 pm |
I typically control my image frames by using the imageframe command that you mentioned. Alternative, I think one could:
1. Select it > mouse right click > draw order > send to back
2. If the image frame was put on defpoints, then I don’t think the image frame or the image would plot. This would not be desirable if the image was your company logo, but may be desirable for a different scenario.
That’s all that I can think off. =)
January 24, 2012 at 2:41 pm |
cool thanks a lot bro
March 5, 2012 at 11:55 pm |
thank you!!!
March 23, 2012 at 10:07 pm |
funky…
[…]Problem: Border shows around my image. « AutoCAD Solutions[…]…
March 26, 2012 at 4:09 am |
clickme…
[…]Problem: Border shows around my image. « AutoCAD Solutions[…]…
March 26, 2012 at 4:10 am |
wordninu…
[…]Problem: Border shows around my image. « AutoCAD Solutions[…]…
April 5, 2012 at 4:09 pm |
buy sell…
[…]Problem: Border shows around my image. « AutoCAD Solutions[…]…
November 7, 2012 at 8:22 am |
Fantastic! Thanks. It was driving me nuts!!
December 26, 2012 at 2:19 pm |
Change the color to 255